New Hydraulic Workshop Presses

Rodcraft Pneumatic Tools WP15

Range with rugged welded frame

2-speed hydraulic pump

  • WP15 (15t)
  • WP20s (20t)
  • WP30P (30t)
  • WP50P (50t)

WP15 (15t)
A compact bench press for small pressing applications up to 15 t, with welded frame.

Rodcraft Pneumatic Tools WP15
TIME SAVING:
Equipped with a 2-speed manual hydraulic pump – fast approaching the work piece and powerful while precise for the pressing job.

PRECISE AND SAFE:
All presses are delivered with a pair of V-blocks for save positioning of round work pieces. The V-blocks can be reversed for use as a flat work plate.

PRACTICAL:
The press has a hand lever on the hydraulic pump for precise pressing. Self-retracting hydraulic piston. Large pressure gauge for easy-to-control pressing force.

VERSATILE ACCESSORY FROM RODCRAFT:
Complete press punch set (DS8 – 8955000050) fits also press models WP15, WP20S with quick change chuck for press punches (8955000039), punch plate (8955000049), 8 press punches with diameters : 10 mm (D10 – 8955000048), 12 mm (D12 – 8955000047), 16 mm (D16 – 8955000042), 18 mm (D18 – 8955000041), 20 mm (D20 – 8955000043), 22 mm (D22 – 8955000044), 25 mm (D25 – 8955000045), 30 mm (D30 – 8955000046).

WP20S (20t)
Free standing press for up to 20t, robust with welded frame in slim design to fit even less spacious car workshops and other mechanical workshops.

Rodcraft Pneumatic Tools WP20S
TIME SAVING:
Equipped with a 2-speed manual hydraulic pump – with automatic switch valve fast approaching the work piece and powerful while precise for the pressing job.

PRECISE AND SAFE:
All presses are delivered with a pair of V-blocks for save positioning of round work pieces. The V-blocks can be reversed for use as a flat work plate.

PRACTICAL:
The press has a hand lever on the hydraulic pump for precise pressing. Self-retracting hydraulic piston. Large pressure gauge for easy-to-control pressing force.

VERSATILE ACCESSORY FROM RODCRAFT:
Complete press punch set (DS8 – 8955000050) fits also press models WP15, WP20S with quick change chuck for press punches (8955000039), punch plate (8955000049), 8 press punches with diameters : 10 mm (D10 – 8955000048), 12 mm (D12 – 8955000047), 16 mm (D16 – 8955000042), 18 mm (D18 – 8955000041), 20 mm (D20 – 8955000043), 22 mm (D22 – 8955000044), 25 mm (D25 – 8955000045), 30 mm (D30 – 8955000046).

WP30P (30t)
A robust floor press for full 1-person-operation up to 30t with welded frame for commercial vehicle workshops and other mechanical workshops.

Rodcraft Pneumatic Tools WP30P
TIME SAVING:
Equipped with a 2-speed manual hydraulic pump – fast approaching the work piece and powerful while precise for the pressing job.

PRECISE AND SAFE:
All presses are delivered with a pair of V-blocks for save positioning of round work pieces. The V-blocks can be reversed for use as a flat work plate.

PRACTICAL:
The press has a hand lever on the hydraulic pump for precise pressing. Self-retracting hydraulic piston. Large pressure gauge for easy-to-control pressing force.

VERSATILE:
With press punch set model DS8 on a rack (8955000040) mounted to the press – always ready on hand and for various diameters.

ERGONOMIC AND SAFE:
1-person operation; One person can easily position the press table in height for adaptation to need, using the central cable winch. All covered cable rollers and the protective plate over the cable near feet prevent the user from injuries or squeezing and avoid damages to the cable itself, for instance when work pieces are dropped.

MORE SPACE:
With cylinder that can be shifted sideways for versatile press applications for instance work pieces that need to be pressed at their end.

VERSATILE ACCESSORY FROM RODCRAFT:
Complete press punch set (DS8 – 8955000050) fits also press models WP15, WP20S with quick change chuck for press punches (8955000039), punch plate (8955000049), 8 press punches with diameters : 10 mm (D10 – 8955000048), 12 mm (D12 – 8955000047), 16 mm (D16 – 8955000042), 18 mm (D18 – 8955000041), 20 mm (D20 – 8955000043), 22 mm (D22 – 8955000044), 25 mm (D25 – 8955000045), 30 mm (D30 – 8955000046).

WP50P (50t)
A sturdy, large floor press for full 1-person-operation up to 50t with welded frame. The right press for heavy vehicle workshops and many other mechanical workshops.

Rodcraft Pneumatic Tools WP50P
TIME SAVING:
Equipped with a 2-speed manual hydraulic pump – fast approaching the work piece and powerful while precise for the pressing job.

PRECISE AND SAFE:
All presses are delivered with a pair of V-blocks for save positioning of round work pieces. The V-blocks can be reversed for use as a flat work plate.

PRACTICAL:
The press has a hand lever on the hydraulic pump for precise pressing. Self-retracting hydraulic piston. Large pressure gauge for easy-to-control pressing force.

VERSATILE:
With press punch set model DS8 on a rack (8955000040) mounted to the press – always ready on hand and for various diameters.

ERGONOMIC AND SAFE:
1-person operation; One person can easily position the press table in height for adaptation to need, using the central cable winch. All covered cable rollers and the protective plate over the cable near feet prevent the user from injuries or squeezing and avoid damages to the cable itself, for instance when work pieces are dropped.

MORE SPACE:
With cylinder that can be shifted sideways for versatile press applications for instance work pieces that need to be pressed at their end. Press WP50P is extra wide for large work pieces.

VERSATILE ACCESSORY FROM RODCRAFT:
Complete press punch set (DS8 – 8955000050) fits also press models WP15, WP20S with quick change chuck for press punches (8955000039), punch plate (8955000049), 8 press punches with diameters : 10 mm (D10 – 8955000048), 12 mm (D12 – 8955000047), 16 mm (D16 – 8955000042), 18 mm (D18 – 8955000041), 20 mm (D20 – 8955000043), 22 mm (D22 – 8955000044), 25 mm (D25 – 8955000045), 30 mm (D30 – 8955000046).

This page is also available in: German, French, Russian