Cric hydro-pneumatique 20T - LHHT20P
8951000076
Lightweight & compact: 28 kg for easier to operate and transport
Foldable handle: 2 parts with 2 Velcro straps for easier transport & storage
Fast and easy lifting / lowering – controlled from the handle (2 & 2’’)
Instead of manual power, the jacks are air powered (air-hydraulic pump) and “remote”-controlled from the handle with a joy stick
Manoeuvring with ease, deep under a vehicle: the long handle bar and the control panel at the end on the grip allow pushing the jack far under the suspension
The handle bar locks in 3 positions controlled by foot pedal
Safe: automatic stop-valve (dead man) For safety the jack stops all movement automatically when the joy stick is released
2 extension adapters / saddle plate: due to a hole and bolt construction they can be stacked – good for extremely high axles. All adapters can be properly stored for transport on a stand on each side of the jack
Silent, smooth to the floor: Soft rubber wheels
Durable: Hard chromium plated piston rod
Foldable handle: 2 parts with 2 Velcro straps for easier transport & storage
Fast and easy lifting / lowering – controlled from the handle (2 & 2’’)
Instead of manual power, the jacks are air powered (air-hydraulic pump) and “remote”-controlled from the handle with a joy stick
Manoeuvring with ease, deep under a vehicle: the long handle bar and the control panel at the end on the grip allow pushing the jack far under the suspension
The handle bar locks in 3 positions controlled by foot pedal
Safe: automatic stop-valve (dead man) For safety the jack stops all movement automatically when the joy stick is released
2 extension adapters / saddle plate: due to a hole and bolt construction they can be stacked – good for extremely high axles. All adapters can be properly stored for transport on a stand on each side of the jack
Silent, smooth to the floor: Soft rubber wheels
Durable: Hard chromium plated piston rod
Non disponible
Cric hydropneumatique télescopique léger de 28 kg
Poignée en 2 pièces fixes avec des bandes Velcro pour le transport
Pneumatique (pompe hydraulique) et «contrôlé» à distance à la poignée (avec un joystick)
Le long levier et le contrôle à la poignée permettent de pousser le cric loin sous les suspensions
Levier verrouillable dans 3 positions avec une pédale
Pression d'air nécessaire : 7 - 10 bars
Consommation d'air 300 l/min
Incl. 1 adaptateur de 100 mm de haut et un adaptateur pour une meilleure adaptation des axes correctement rangés pour le transport sur un support de chaque côté du cric
Type de roues | Rubber |
---|---|
Dimension G | 964 mm |
Dimension F | 238 / 320 mm |
Dimension E | 100 mm |
Dimension D | 370 mm |
Dimension C | 270 mm |
Dimension B | 200 mm |
Dimension A | 166 mm |
Capacité | 20 Tonne(s) |
Modèle | LHHT20P |
8951000076 | |
Dimension D+E | 470 mm |
Poids | 28 |
Catégorie d'outils | Crics hydro-pneumatiques |
Rédigez votre propre commentaire
Vue éclatée
Manuel opérateur
Instructions de sécurité
Certificats